View SHP1000PS24_8788795.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shp350 series ? 420 w high line output power ? rugged industrial construction ? variable speed fan for noise reduction ? -40 c to +70 c operation ? 5 v standby ? ac ok, remote on/off and active current share ? screw terminals ? semi f47 compliant ? 3 year warranty the shp350 ac-dc power supply provides upto 420 w of output power in a compact rugged mechanical package, suitable for a range of industrial applications. the unit comprises of a main output with voltages from 12-48 vdc and a 5 vdc standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of ac input and remote on/off control. multiple units can be used in parallel via the current share facility, providing higher power solutions. inherently low earth l eakage current, and conducted emc compliance to class b also simplify higher power system design. packaged in a compact 7 (178 mm) x 3.6 (91 mm) x 2.1 (53 mm) and carrying iec60950 family safety approvals, the shp350 has a load dependant variable speed fan, is fully protected with overtemperature shutdown and provides -40 oc start up and full pow er from -20 oc to 50 oc and 50% power at +70 oc.
figure 1 2 xppower.com input characteristics input derating curve characteristic minimum typical maximum units notes & conditions input voltage - operating 85 115/230 264 vac derate output power < 90 vac. see fig. 1. input frequency 47 50/60 63 hz power factor > 0.9 en61000-3-2 class a compliant, class c compliant 10% load input current - no load 0.15 a input current - full load (350 w) 3.8/2.1 a 115/230 vac inrush current 60 a 230 vac cold start, 25 o c earth leakage current 150/260 500 a 115/230 vac/50 hz (typ.), 264 vac/60 hz (max.) input protection t10 a/250 v internal fuse in both lines models and ratings output voltage v1 output current v1 standby supply v2 output power model number continuous peak 12 v 26.5 a 5 v / 0.2 a 318 w shp350ps12 15 v 22.0 a 5 v / 0.2 a 330 w shp350ps15 24 v 14.5 a 5 v / 0.2 a 348 w 417 w shp350ps24 28 v 12.5 a 5 v / 0.2 a 350 w 420 w shp350ps28 36 v 9.7 a 5 v / 0.2 a 350 w 420 w shp350ps36 48 v 7.3 a 5 v / 0.2 a 350 w 420 w shp350ps48 90 85 264 input voltage (vac) 40 50 80 60 70 90 100 output power (%)
xppower.com 3 output characteristics characteristic minimum typical maximum units notes & conditions output voltage - v1 12 48 vdc see models and ratings table initial set accuracy 1 (v1) , 5 (v2) % 50% load, 115/230 vac output voltage adjustment 10 % v1 only. see mechanical details. minimum load 0 a start up delay 0.5 s 230 vac full load hold up time 20 ms drift 0.2 % after 20 min warm up line regulation 0.5 % 90-264 vac load regulation 1 (v1) , 5 (v2) % 0-100% load. transient response - v1 4 % recovery within 1% in less than 500 s for a 50-75% and 75-50% load step ripple & noise 1% % pk-pk v1: 20 mhz bandwidth overvoltage protection 115 145 % vnom dc. output 1 only, recycle input to reset overload protection 110 140 % i nom output 1 only, auto reset. see fig 2. short circuit protection auto recovery, hiccup mode temperature coefficient 0.02 %/?c overtemperature protection c protects unit from overtemperature. auto reset. output overload characteristic figure 2 typical v1 overload characteristic (shp350ps12 shown) 0 2 4 6 8 10 12 14 0 5 10 15 20 25 30 35 output current (a) output voltage (v) unit enters hiccup mode
xppower.com xxxxxxxxxx 4 general specifications efficiency vs load characteristic minimum typical maximum units notes & conditions efficiency 85 % see fig 3 & 4 isolation: input to output input to ground output to ground 3000 vac 1500 vac 500 vdc switching frequency 70/200/130 khz pfc converter / main converter / standby power density 6.6 w/in 3 mean time between failure 216 khrs mil-hdbk-217f at 25 o c gb weight 2.1 (940) lb (g) see mechanical details signals & control shp350ps12 figure 3 characteristic notes & conditions signals & control remote sense compensates for 0.5 v total voltage drop ac ok / power fail open collector referenced to negative sense, transistor normally off when ac is good (see fig. 5 & 8) ac ok: provides 5 ms warning of loss of output from ac failure remote on/off (inhibit/enable) uncommited isolated optocoupler diode, powered diode inhibits both v1 & v2 (fan supply) (see fig. 6 & 9) current share when more than one unit (with the same output voltage) is used in parallel to increase output current, the current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). this will force the current to share between the outputs. similarly pins 2/4 of each unit should also be connected as a ground reference. units share current within 10% of each other at full load. see fig 7. standby supply v2 isolated 5 v/0.2 a supply, always present when ac supplied. 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 10 20 30 40 50 60 70 80 90 100 load (%) efficiency 115vac input 230vac input 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 10 20 30 40 50 60 70 80 90 100 load (%) efficiency 115vac input 230vac input shp350ps48 figure 4
xppower.com 5 figure 5 figure 6 ac ok/power fail remote on/off (inhibit) signals & control ac ok collector pin 3 ac ok emitter pin 2 (-sense) power supply transistor on (<0.8 v): ac not ok transistor off (>4.5 v): ac ok j2 logic connector 330r 5 v standby return pin 10 5 v standby pin 9 max 12 v 20 ma on (<0.8 v): k off (>4.5 v): inhibit hi inhibit low inhibit hi pin 7 power supply 100 r 800 r 2-5 ma chassis j3 logic connector signal high: power supply off low or floating: power supply on signal high: power supply on low or floating: power supply off inhibit lo pin 8 5 v standby pin 9 5 v standby return pin 10 inhibit hi pin 7 power supply 100 r chassis j3 logic connector inhibit lo pin 8 5 v standby pin 9 5 v standby return pin 10 800 r 2-5 ma signals - parallel load & current share connection example - + - + - + - + v1 output v1 output v1 output - sense - sense + sense + sense - sense + sense current share current share shp350psxx (1) shp350psxx (2) shp350psxx (3) load figure 7
xppower.com 6 ac ok collector pin 3 ac ok emitter pin 2 power supply 1 j3 connector 330r 5 v standby return pin 10 5 v standby pin 9 ok emitter pin 2 power supply 2 j3 connector ac ok emitter pin 2 power supply 3 j3 connector transistor on (<0.8 v): ac not ok transistor off (>4.5 v): ac ok ac ok collector pin 3 ok collector pin 3 figure 8 parallel ac ok connection parallel remote inhibit connection figure 9 psu 1 psu 2 psu 8 pin 7 pin 8 pin 7 pin 8 pin 7 pin 8 open or ttl high psu on short circuit or ttl low psu off
xppower.com 7 environmental temperature derating curve fan speed control characteristic minimum typical maximum units notes & conditions operating temperature -40 +70 c see derating curve, fig 10. storage temperature -40 +85 c cooling integral variable speed fan load dependant. see fig 11. humidity 5 95 %rh non-condensing operating altitude 3000 m shock 3 x 30 g/11 ms shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. en60068-2-27 & en60068-2-47. vibration single axis 10-500 hz at 2 g x 10 sweeps. en60068-2-6. electromagnetic compatibility - immunity phenomenon standard test level criteria notes & conditions low voltage psu emc en61204-3 high severity level as below harmonic current en61000-3-2 class a esd en61000-4-2 3 a radiated en61000-4-3 3 a eft en61000-4-4 3 a surges en61000-4-5 installation class 3 a conducted en61000-4-6 3 a dips and interruptions en61000-4-11 dip: 20% 5000 ms a dip: 30% 500 ms a dip: 60% 200 ms b dip: 100% 5000 ms b semi f47 compliant figure 10 figure 11 -40 -20 0 +70 +50 50 100 ambient temperature (?) some specification parameters may not be met output load (%) 0 0 0 fan speed (%) 100 25 10 50 75 100 output power (%)
18-aug-14 xppower.com 8 electromagnetic compatibility - emissions phenomenon standard test level criteria notes & conditions conducted en55022 class b radiated en55022 class a voltage fluctuations en61000-3-3 safety agency approvals safety agency safety standard category cb report ul us/tba/ul iec60950-1:2005 ed 2 information technology ul ul file #139109 ul60950-1 (2007) csa 22.2 no.60950-1-07 ed 2 information technology tuv tuv certificate #tba, en60950-1:2009 information technology ce lvd equipment protection class safety standard notes & conditions class i iec60950-1:2005 ed 2 see safety agency conditions of acceptibility for details mechanical details 7.00 (177.8) 2.20 (55.9) a mounting hole 8 places m3 x 0.5 0.15 (3.8) max. penetration 0.06 (1.5) standard terminal block m4 screw 4 pins 0.37 (9.5) centre standard terminal block m3.5 screw 3 pins 0.37 (9.5) centre l n -vout +vout b 1.13 (28.72) 1.03 (26.2) 2.1 (53.34) vr led 5.35 (136.0) 0.70 (17.9) 3.6 (91.44) 1.61 (41.0) -2x 2.44 (62.0) airflow a a a a a a c l logic connector j3 detail b scale 2 : 1 pin 1 pin 9 pin 2 pin 10 notes: 1. dimensions shown in inches (mm). 2. weight: 1.73 lb (0.788 kg). 3. logic connector j3 mates with jst housing phdr-10vs and sphd-001t-p0.5 crimp terminals j3 logic connector (jst b10b-phdss) pin function 1 + sense 2 - sense 3 ac ok/power fail 4 - sense 5 current share 6 current share 7 + inhibit 8 - inhibit 9 +5 v standby 10 5 v standby return
shp650 series ? rugged industrial construction ? end fan, top fan & uchannel mechanical options ? -40 c to +70 c operation ? 5 v standby ? ac ok, remote on/off and active current share ? load dependant variable fan speed ? screw terminals ? semi f47 compliant ? 3 year warranty the shp650 ac-dc power supply provides upto 650 w of output power in three mechanical packages to provide installation flexibility in a range of industrial applications. the unit comprises of a main output with voltages from 12-48 vdc and two peripheral outputs providing a 12 vdc fan supply and a 5 vdc standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of a c input and remote on/off control. multiple units can used in parallel via the current share facility, providing higher power solutions. inherently low earth leak age current, and conducted emc compliance to class b also simplify higher power system design. packaged in a compact 8 (203 mm) x 4 (102 mm) x 2.6 (65 mm) and carrying iec60950 family safety approvals, the shp650 has a load dependant variable speed fan is fully protected with overtemperature shutdown and provides full power from -20 oc to 50 oc and 50% power at +70 oc.
figure 1 2 xppower.com input characteristics input derating curve characteristic minimum typical maximum units notes & conditions input voltage - operating 85 115/230 264 vac derate output power < 90 vac. see fig. 1. input frequency 47 50/60 63 hz agency approval, 47-63 hz power factor > 0.9 en61000-3-2 class a compliant en61000-3-2 class c for loads 10% input current - no load 0.15/0.3 a 115/230 vac input current - full load 6.5/3.2 a 115/230 vac inrush current 40 a 230 vac cold start, 25 o c earth leakage current 0.3/0.5 0.75 ma 115/230 vac/50 hz (typ.), 264 vac/60 hz (max.) input protection t16 a / 250 v internal in-line fuse models and ratings end fan models (-ef) output voltage v1 max output current v1 fan supply v2 standby supply v3 max output power model number 12 v 50.0 a not available 5 v / 0.2 a 607 w shp650ps12-ef 15 v 40.0 a not available 5 v / 0.2 a 607 w shp650ps15-ef 24 v 27.0 a not available 5 v / 0.2 a 657 w shp650ps24-ef 28 v 23.0 a not available 5 v / 0.2 a 651 w shp650ps28-ef 36 v 18.0 a not available 5 v / 0.2 a 657 w shp650ps36-ef 48 v 13.5 a not available 5 v / 0.2 a 657 w shp650ps48-ef top fan models (-tf) output voltage v1 max output current v1 fan supply v2 standby supply v3 max output power model number 12 v 50.0 a not available 5 v / 0.2 a 607 w shp650ps12-tf 15 v 40.0 a not available 5 v / 0.2 a 607 w shp650ps15-tf 24 v 27.0 a not available 5 v / 0.2 a 657 w shp650ps24-tf 28 v 23.0 a not available 5 v / 0.2 a 651 w shp650ps28-tf 36 v 18.0 a not available 5 v / 0.2 a 657 w shp650ps36-tf 48 v 13.5 a not available 5 v / 0.2 a 657 w shp650ps48-tf u channel models output voltage v1 max output current v1 fan supply v2 standby supply v3 max output power (1) model number 12 v 50.0 a 12 v / 0.5 a 5 v / 0.2 a 601 w shp650ps12 15 v 40.0 a 12 v / 0.5 a 5 v / 0.2 a 601 w shp650ps15 24 v 27.0 a 12 v / 0.5 a 5 v / 0.2 a 651 w shp650ps24 28 v 23.0 a 12 v / 0.5 a 5 v / 0.2 a 655 w shp650ps28 36 v 18.0 a 12 v / 0.5 a 5 v / 0.2 a 651 w shp650ps36 48 v 13.5 a 12 v / 0.5 a 5 v / 0.2 a 651 w shp650ps48 1. u channel models require a minimum of 5.5 m/s airflow from the system for cooling 90 85 264 input voltage (vac) 40 50 80 60 70 90 100 output power (%)
xppower.com 3 output characteristics characteristic minimum typical maximum units notes & conditions output voltage - v1 12 48 vdc see models and ratings table initial set accuracy 1 (v1) , 5 (v3) % 50% load, 115/230 vac output voltage adjustment 10 % v1 only. see mechanical details. minimum load 0 a start up delay 0.5 s 230 vac full load hold up time 20 ms drift 0.2 % after 20 min warm up line regulation 0.5 % 90-264 vac load regulation 1 (v1) , 5 (v3) % 0-100% load. transient response - v1 4 % recovery within 1% in less than 500 s for a 50-75% and 75-50% load step ripple & noise 1 % pk-pk v1: 20 mhz bandwidth overvoltage protection 115 140 % vnom dc. output 1 only, recycle input to reset overload protection 110 145 % i nom output 1 only, auto reset. see fig 2. short circuit protection auto recovery, hiccup mode temperature coefficient 0.02 %/?c overtemperature protection c protects unit from overtemperature. auto reset. output overload characteristic figure 2 typical v1 overload characteristic (shp650ps12 shown) unit enters hiccup mode
xppower.com xxxxxxxxxx 4 general specifications efficiency vs load characteristic minimum typical maximum units notes & conditions efficiency 84 % see fig 3 & 4 isolation: input to output input to ground output to ground 3000 vac 1500 vac 500 vdc switching frequency 70/200 khz pfc converter / main converter power density 8.2 w/in 3 mean time between failure 260 khrs mil-hdbk-217f at 25 o c gb weight 2.8 (1.25) lb (kg) see mechanical details signals & control shp650ps12 figure 3 characteristic notes & conditions signals & control remote sense compensates for 0.5 v total voltage drop ac ok / power fail open collector referenced to negative sense, transistor normally off when ac is good (see fig. 5 & 8) ac ok: provides 5 ms warning of loss of output from ac failure remote on/off (inhibit/enable) uncommited isolated optocoupler diode, powered diode inhibits both v1 & v2 (fan supply) (see fig. 6 & 9) current share when more than one unit (with the same output voltage) is used in parallel to increase output current, the current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). this will force the current to share between the outputs. similarly pins 2/4 of each unit should also be connected as a ground reference. units share current within 10% of each other at full load. see fig 7. standby supply v3 isolated 5 v/0.2 a supply, always present when ac supplied. shp650ps48 figure 4
xppower.com 5 figure 5 figure 6 ac ok/power fail remote on/off (inhibit) signals & control ac ok collector pin 3 ac ok emitter pin 2 (-sense) power supply transistor on (<0.8 v): ac not ok transistor off (>4.5 v): ac ok j3 logic connector 330r 5 v standby return pin 10 5 v standby pin 9 max 12 v 20 ma <0.8 v): >4.5 v): inhibit hi inhibit low inhibit hi pin 7 power supply 100 r 800 r 2-5 ma chassis j3 logic connector signal high: power supply off low or floating: power supply on signal high: power supply on low or floating: power supply off inhibit lo pin 8 5 v standby pin 9 5 v standby return pin 10 inhibit hi pin 7 power supply 100 r chassis j3 logic connector inhibit lo pin 8 5 v standby pin 9 5 v standby return pin 10 800 r 2-5 ma signals - parallel load & current share connection example - + - + - + - + v1 output v1 output v1 output - sense - sense + sense + sense - sense + sense current share current share shp650psxx (1) shp650psxx (2) shp650psxx (3) load figure 7
xppower.com 6 ac ok collector pin 3 ac ok emitter pin 2 power supply 1 j3 connector 330r 5 v standby return pin 10 5 v standby pin 9 ok emitter pin 2 power supply 2 j3 connector ac ok emitter pin 2 power supply 3 j3 connector transistor on (<0.8 v): ac not ok transistor off (>4.5 v): ac ok ac ok collector pin 3 ok collector pin 3 figure 8 parallel ac ok connection parallel remote inhibit connection figure 9 psu 1 psu 2 psu 8 pin 7 pin 8 pin 7 pin 8 pin 7 pin 8 open or ttl high psu on short circuit or ttl low psu off
xppower.com 7 environmental temperature derating curve fan speed control characteristic minimum typical maximum units notes & conditions operating temperature -40 +70 c see derating curve, fig 10. storage temperature -40 +85 c some specification parameters maybe exceeded until after 20 minutes warm up period. cooling integral variable speed fan load dependant. see fig 11. humidity 5 95 %rh non-condensing operating altitude 3000 m shock 3 x 30 g/11 ms shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. vibration single axis 10-500 hz at 2 g x 10 sweeps electromagnetic compatibility - immunity phenomenon standard test level criteria notes & conditions low voltage psu emc en61204-3 high severity level as below harmonic current en61000-3-2 class a class c for loads 10% esd en61000-4-2 3 a radiated en61000-4-3 3 a eft en61000-4-4 3 a surges en61000-4-5 installation class 3 a conducted en61000-4-6 3 a dips and interruptions en61000-4-11 dip: 30% 10 ms a dip: 60% 100 ms b dip: 100% 5000 ms b semi f47 compliant figure 10 figure 11 -40 -20 0 +70 +50 50 100 ambient temperature (?) some specification parameters may not be met output load (%) 0 0 50 0 fan speed (%) 100 25 50 75 100 output power (%)
xppower.com 8 electromagnetic compatibility - emissions phenomenon standard test level criteria notes & conditions conducted en55022 class b radiated en55022 class a voltage fluctuations en61000-3-3 safety agency approvals safety agency safety standard category cb report ul us/14350/ul iec60950-1:2005 ed 2 information technology ul ul file #139109 ul60950-1 (2007) csa 22.2 no.60950-1-07 ed 2 information technology tuv tuv certificate #b 09 10 57396 064 en60950-1:2009 information technology ce lvd equipment protection class safety standard notes & conditions class i iec60950-1:2005 ed 2 see safety agency conditions of acceptibility for details mechanical details - end fan (suffix -ef) vo+ vo- standard terminal block, m4 screw, 6 pins, 9.5 mm center torque 10.62 lbs-in (1.2 nm) standard terminal block, m3.5 screw 3 pins 9.5 mm center torque 10.62 lbs-in (1.2 nm) 9.18 (233.2) n e l 2.50 (63.5) v1 adjustment output on, led 1.95 (49.5) 2.49 (63.3) airflow pin 1 pin 9 pin 2 pin 10 j3: logic connector 0.87 (22.2) 2.86 (72.6) 6.53 (165.8) 8.00 (203.2) 4.00 (101.6) c l 2 x m3 thd both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 nm) 4 x m3 thd 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 nm) notes: 1. dimensions shown in inches (mm). 2. weight: 2.8 lb (1.25 kg). 3. j3 mating plug: jst part no. phdr-10vs, contact: 26-22 awg jst part no. sphd-001t-p0.5. j3 logic connector (jst b10b-phdss) pin function 1 + sense 2 - sense 3 ac ok/power fail 4 - sense 5 current share 6 current share 7 + inhibit 8 - inhibit 9 +5 v standby (v3) 10 5 v standby return (v3)
xppower.com xxxxxxxxxx 9 mechanical details mechanical details - top fan (suffix -tf) notes: 1. dimensions shown in inches (mm). 2. weight: 2.6 lb (1.2 kg). 3. j3 mating plug: jst part no. phdr-10vs, contact: 26-22 awg jst part no. sphd-001t-p0.5. standard terminal block, m4 screw, 6 pins, 9.5 mm center torque 10.62 lbs-in (1.2 nm) standard terminal block, m3.5 screw 3, pins 9.5 mm center torque 10.62 lbs-in (1.2 nm) vo+ vo- n e 8.00 (203.2) l 2.58 (65.5) 2.50 (63.5) 1.95 (49.5) 0.87 (22.2) 6.53 (165.8) 2.86 (72.6) 4.00 (101.6) pin 1 pin 9 pin 2 pin 10 j3: logic connector v1 adjustment output on, led airflow 2 x m3 thd both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 nm) 4 x m3 thd 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 nm) j3 logic connector (jst b10b-phdss) pin function 1 + sense 2 - sense 3 ac ok/power fail 4 - sense 5 current share 6 current share 7 + inhibit 8 - inhibit 9 +5 v standby (v3) 10 5 v standby return (v3)
xppower.com xxxxxxxxxx 10 21-oct-13 mechanical details - u channel (no suffix) notes: 1. dimensions shown in inches (mm). 2. weight: 2.4 lb (1.1 kg). 3. requires system airflow, see thermal considerations. 4. j3 mating plug: jst part no. phr-2, contact: jst part no. sph-002t-p0.5s. 5. j3 mating plug: jst part no. phdr-10vs, contact: 26-22 awg jst part no. sphd-001t-p0.5. vo+ vo- 8.00 (203.2) n e l system airflow required 2.46 (62.5) 2.86 (72.6) 4.00 (101.6) c l 1.95 (49.5) v1 adjustment output on, led standard terminal block m3.5 screw 3 pins 9.5 mm center torque 10.62 lbs-in (1.2 nm) standard terminal block, m4 screw 6 pins 9.5 mm center torque 10.62 lbs-in (1.2 nm) pin 1 j1: fan connector 6.53 (165.80) 0.87 (22.2) pin 1 pin 9 pin 2 pin 10 j3: logic connector 2 x m3 thd both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 nm) 4 x m3 thd 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 nm) j3 logic connector (jst b10b-phdss) pin function 1 + sense 2 - sense 3 ac ok/power fail 4 - sense 5 current share 6 current share 7 + inhibit 8 - inhibit 9 +5 v standby (v3) 10 5 v standby return (v3) j1 fan connector (jst b2b-ph-kl ( lf) (sn) pin function 1 +v 2 nc 3 -v thermal considerations (u channel) in order to ensure reliable operation in the end use application the recommended component temperatures listed should not be exceeded. higher temperatures up to the maximum stated can be used but product lifetime may be reduced. temperature measurements (ambient 50 c) component recommended temperature c maximum temperature c c55 capacitor 70 105 t302 transformer 90 120 c314 capacitor 70 105 d311 diode 100 120
shp1000 series ? 1200 w high line output power ? rugged industrial construction ? variable speed fan for noise reduction ? -40 c to +70 c operation ? 5 v standby ? ac ok, remote on/off and active current share ? screw terminals ? 3 year warranty the shp1000 ac-dc power supply provides upto 1200 w of output power in a compact rugged mechanical package, suitable for a range of industrial applications. the unit comprises of a main output with voltages from 12-48 vdc and a 5 vdc standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of ac input and remote on/off control. multiple units can be used in parallel via the current share facility, providing higher power solutions. inherently low earth l eakage current, and conducted emc compliance to class b also simplify higher power system design. packaged in a compact 9.5 (241 mm) x 5.9 (150 mm) x 2.4 (61 mm) and carrying iec60950 family safety approvals, the shp1000 has a load dependant variable speed fan is fully protected with overtemperature shutdown and provides -40 oc start up with full power from -20 oc to 50 oc and 50% power at +70 oc.
figure 1 2 xppower.com input characteristics input derating curve characteristic minimum typical maximum units notes & conditions input voltage - operating 85 115/230 264 vac derate output power < 90 vac. see fig. 1. input frequency 47 50/60 63 hz power factor > 0.9 en61000-3-2 class a compliant input current - no load 0.35/0.5 a 115/230 vac input current - full load (1000 w) 10.9/5.3 a 115/230 vac inrush current 60 a 230 vac cold start, 25 o c earth leakage current 75/140 250 a 115/230 vac/50 hz (typ.), 264 vac/60 hz (max.) input protection t20 a/250 v internal fuse in both lines models and ratings output voltage v1 max output current v1 standby supply v2 max output power model number <180 vac >180 vac <180 vac >180 vac 12 v 83.0 a 5 v / 1.0 a 1001 w shp1000ps12 15 v 67.0 a 5 v / 1.0 a 1010 w shp1000ps15 24 v 42.0 a 50.0 a 5 v / 1.0 a 1013 w 1205 w SHP1000PS24 28 v 36.0 a 42.9 a 5 v / 1.0 a 1013 w 1206 w shp1000ps28 36 v 28.0 a 33.3 a 5 v / 1.0 a 1013 w 1204 w shp1000ps36 48 v 21.0 a 25.0 a 5 v / 1.0 a 1013 w 1205 w shp1000ps48 90 85 264 input voltage (vac) 40 50 80 60 70 90 100 output power (%)
xppower.com 3 output characteristics characteristic minimum typical maximum units notes & conditions output voltage - v1 12 48 vdc see models and ratings table initial set accuracy 1 (v1) , 5 (v2) % 50% load, 115/230 vac output voltage adjustment 10 % v1 only. see mechanical details. minimum load 0 a start up delay 0.5 s 230 vac full load hold up time 20 ms drift 0.2 % after 20 min warm up line regulation 0.5 % 90-264 vac load regulation 1 (v1) , 5 (v2) % 0-100% load. transient response - v1 4 % recovery within 1% in less than 500 s for a 50-75% and 75-50% load step ripple & noise 1 % pk-pk v1: 20 mhz bandwidth overvoltage protection 115 145 % vnom dc. output 1 only, recycle input to reset overload protection 110 140 % i nom output 1 only, auto reset. see fig 2. short circuit protection auto recovery, hiccup mode temperature coefficient 0.02 %/?c overtemperature protection c protects unit from overtemperature. auto reset. output overload characteristic figure 2 typical v1 overload characteristic (shp1000ps12 shown) 0 2 4 6 8 10 12 14 030405060708090 output current (a) output voltage (v) unit enters hiccup mode
xppower.com xxxxxxxxxx 4 general specifications efficiency vs load characteristic minimum typical maximum units notes & conditions efficiency 84 % see fig 3 & 4 isolation: input to output input to ground output to ground 3000 vac 1500 vac 500 vdc switching frequency 70/200/130 khz pfc converter / main converter / standby power density 8.9 w/in 3 mean time between failure 275 khrs mil-hdbk-217f at 25 o c gb weight 2.1 (940) lb (g) see mechanical details signals & control shp1000ps12 figure 3 characteristic notes & conditions signals & control remote sense compensates for 0.5 v total voltage drop ac ok / power fail open collector referenced to negative sense, transistor normally off when ac is good (see fig. 5 & 8) ac ok: provides 5 ms warning of loss of output from ac failure remote on/off (inhibit/enable) uncommited isolated optocoupler diode, powered diode inhibits both v1 & v2 (fan supply) (see fig. 6 & 9) current share when more than one unit (with the same output voltage) is used in parallel to increase output current, the current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). this will force the current to share between the outputs. similarly pins 2/4 of each unit should also be connected as a ground reference. units share current within 10% of each other at full load. see fig 7. standby supply v2 isolated 5 v/1.0 a supply, always present when ac supplied. shp1000ps48 figure 4
xppower.com 5 figure 5 figure 6 ac ok/power fail remote on/off (inhibit) signals & control ac ok collector pin 3 ac ok emitter pin 2 (-sense) power supply transistor on (<0.8 v): ac not ok transistor off (>4.5 v): ac ok j2 logic connector 330r 5 v standby return pin 10 5 v standby pin 9 max 12 v 20 ma on (<0.8 v): k off (>4.5 v): inhibit hi inhibit low inhibit hi pin 7 power supply 100 r 800 r 2-5 ma chassis j3 logic connector signal high: power supply off low or floating: power supply on signal high: power supply on low or floating: power supply off inhibit lo pin 8 5 v standby pin 9 5 v standby return pin 10 inhibit hi pin 7 power supply 100 r chassis j3 logic connector inhibit lo pin 8 5 v standby pin 9 5 v standby return pin 10 800 r 2-5 ma signals - parallel load & current share connection example - + - + - + - + v1 output v1 output v1 output - sense - sense + sense + sense - sense + sense current share current share shp1000psxx (1) shp1000psxx (2) shp1000psxx (3) load figure 7
xppower.com 6 ac ok collector pin 3 ac ok emitter pin 2 power supply 1 j3 connector 330r 5 v standby return pin 10 5 v standby pin 9 ok emitter pin 2 power supply 2 j3 connector ac ok emitter pin 2 power supply 3 j3 connector transistor on (<0.8 v): ac not ok transistor off (>4.5 v): ac ok ac ok collector pin 3 ok collector pin 3 figure 8 parallel ac ok connection parallel remote inhibit connection figure 9 psu 1 psu 2 psu 8 pin 7 pin 8 pin 7 pin 8 pin 7 pin 8 open or ttl high psu on short circuit or ttl low psu off
xppower.com 7 environmental temperature derating curve fan speed control characteristic minimum typical maximum units notes & conditions operating temperature -40 +70 c see derating curve, fig 10. storage temperature -40 +85 c cooling 2 x integral variable speed fans load dependant. see fig 11. humidity 5 95 %rh non-condensing operating altitude 3000 m shock 3 x 30 g/11 ms shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. vibration single axis 10-500 hz at 2 g x 10 sweeps electromagnetic compatibility - immunity phenomenon standard test level criteria notes & conditions low voltage psu emc en61204-3 high severity level as below harmonic current en61000-3-2 class a esd en61000-4-2 3 a radiated en61000-4-3 3 a eft en61000-4-4 3 a surges en61000-4-5 installation class 3 a conducted en61000-4-6 3 a dips and interruptions en61000-4-11 dip: 20% 5000 ms a dip: 30% 500 ms a dip: 60% 200 ms b dip: 100% 5000 ms b semi f47 compliant figure 10 figure 11 -40 -20 0 +70 +50 50 100 ambient temperature (?) some specification parameters may not be met output load (%) 0 0 0 fan speed (%) 100 25 10 50 75 100 output power (%)
19-feb-13 xppower.com 8 electromagnetic compatibility - emissions phenomenon standard test level criteria notes & conditions conducted en55022 class b radiated en55022 class a voltage fluctuations en61000-3-3 safety agency approvals safety agency safety standard category cb report ul us/15582/ul iec60950-1:2005 ed 2 information technology ul ul file #139109 ul60950-1 (2007) csa 22.2 no.60950-1-07 ed 2 information technology tuv tuv certificate #b 10 09 57396 080, en60950-1:2009 information technology ce lvd equipment protection class safety standard notes & conditions class i iec60950-1:2005 ed 2 see safety agency conditions of acceptibility for details mechanical details c l 4.50 (114.3) 1.20 (30.5) pin 2 pin 1 pin 10 pin 9 detail a j3: logic connector 9.41 (238.9) bb bb bb 4 x m4-0.7 thd both side faces 0.15 (3.8) max screw penetration max torque 10.62 lbs-in (1.2 nm) 4 x m4-0.7 thd both side faces 0.15 (3.8) max screw penetration max torque 10.62 lbs-in (1.2 nm) airflow 1.33 (33.8) 6.70 (170.2) vo+ vo- l n a 9.48 (240.9) 5.90 (149.8) 2.91 (73.9) 1.20 (30.5) 1.47 (37.4) 9.55 (242.64) 2.40 (61.0) v1 adjustment output on, led standard terminal block, m4 screw 3 pins 0.37 (9.5) center torque 10.62 lbs-in (1.2 nm) standard terminal block, m6 screw, 4 pins 0.62 (16.0) center torque 26.0 lbs-in (2.94 nm) notes: 1. dimensions shown in inches (mm). 2. weight: 2.8 lb (1.25 kg). 3. j3 mating plug: jst part no. phdr-10vs, contact: 26-22 awg jst part no. sphd-001t-p0.5. j3 logic connector (jst b10b-phdss) pin function 1 + sense 2 - sense 3 ac ok/power fail 4 - sense 5 current share 6 current share 7 + inhibit 8 - inhibit 9 +5 v standby 10 -5 v standby

▲Up To Search▲

Price & Availability of SHP1000PS24

	To Download SHP1000PS24 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .